Welcome visitor you can login or create an account.
lupd_baseprice lupd_baseprice_old lupd_taxprice $ . , 2 14.99

Helios RDA Clone with Adjustable Airflow

Availability:In Stock

Product Code:EC0126

Brand:

Comes with coil and wick installed, although you will want to install your own. Please note that we cannot do it for you, if you buy this RDA you will need to install coils and wicks yourself!

What are RBAs and RDAs?

RBAs are Rebuildable Atomizers which are enthusiast tanks that can produce a lot of vapor. RDAs are Rebuildable Dripper [Dripping] Atomizers.

The difference between the two is that RBAs have a tank to hold liquid, while RDAs can only take about ~10 drops of liquid at a time. The advantage of RDAs is that you can easily change flavors after a couple of puffs.

RBAs and RDAs require you to install wicks and coils. These coils come in all sorts of variety that have different resistances and vapor production. The same can be said of wicks. We recommend that you read about the different coils and wicks available to see which one you like the most. Each coil and wick type have their own pros and cons.

Our RBAs and RDAs have wicks and coils pre-installed but they are only for show. You should get your own installed after you receive your purchase. The only one with decent preinstalled wicks and coils (ready for use) is our Kayfun 3.1 RBA.

Are RBAs and RDAs for me?

If you are just starting to vape we don’t recommend these. However if you’re looking to produce huge clouds of vapor and don’t mind a little learning than these are for you!

What is so special about these?

RBAs and RDAs have the potential to produce huge amounts of vapor. These require either you to install wicks and coils (of your choosing) or you can have a vape shop do it for you.

What are the potential risks?

RBAs and RDAs for the most part can only be used with a mechanical mod. Mechanical mods DO NOT have any safety functions such as auto shutoff, so if you are not careful you could potentially have a grenade in your hand! Please do some research before deciding that these are right for you!

Most people use these with no issues, and as long as you go to a vape shop for installation you should be fine. However there are risks so please read up before purchasing!

If you are an electrical engineer or studying electrical engineering, you just need to know the principles of Ohms, Voltage, and Wattage to understand these vaporizers.

Some recommended reading:

Sub Ohm Vaping 

Mechanical Mod Introduction 

A RBA and RDA rebuild guide (you can youtube more videos for more clarification, or stop by a vape shop and watch the pros!)

 
+
$14.99
Description

Comes with coil and wick installed, although you will want to install your own. Please note that we cannot do it for you, if you buy this RDA you will need to install coils and wicks yourself!

What are RBAs and RDAs?

RBAs are Rebuildable Atomizers which are enthusiast tanks that can produce a lot of vapor. RDAs are Rebuildable Dripper [Dripping] Atomizers.

The difference between the two is that RBAs have a tank to hold liquid, while RDAs can only take about ~10 drops of liquid at a time. The advantage of RDAs is that you can easily change flavors after a couple of puffs.

RBAs and RDAs require you to install wicks and coils. These coils come in all sorts of variety that have different resistances and vapor production. The same can be said of wicks. We recommend that you read about the different coils and wicks available to see which one you like the most. Each coil and wick type have their own pros and cons.

Our RBAs and RDAs have wicks and coils pre-installed but they are only for show. You should get your own installed after you receive your purchase. The only one with decent preinstalled wicks and coils (ready for use) is our Kayfun 3.1 RBA.

Are RBAs and RDAs for me?

If you are just starting to vape we don’t recommend these. However if you’re looking to produce huge clouds of vapor and don’t mind a little learning than these are for you!

What is so special about these?

RBAs and RDAs have the potential to produce huge amounts of vapor. These require either you to install wicks and coils (of your choosing) or you can have a vape shop do it for you.

What are the potential risks?

RBAs and RDAs for the most part can only be used with a mechanical mod. Mechanical mods DO NOT have any safety functions such as auto shutoff, so if you are not careful you could potentially have a grenade in your hand! Please do some research before deciding that these are right for you!

Most people use these with no issues, and as long as you go to a vape shop for installation you should be fine. However there are risks so please read up before purchasing!

If you are an electrical engineer or studying electrical engineering, you just need to know the principles of Ohms, Voltage, and Wattage to understand these vaporizers.

Some recommended reading:

Sub Ohm Vaping 

Mechanical Mod Introduction 

A RBA and RDA rebuild guide (you can youtube more videos for more clarification, or stop by a vape shop and watch the pros!)

 
Specification
Write a review
0 reviews for "Helios RDA Clone with Adjustable Airflow"
0 reviews

Write a review




  • Note: HTML is not translated!

  • Rating: Bad           Good